Screw Pile Foundations in Calgary, Proven by Measured Torque

Calgary screw piles, torque-verified in every season. We install helical screw piles under homes, decks, garages and commercial buildings throughout Calgary and southern Alberta. Each pile leaves a written torque record, with engineering supplied wherever the permit calls for it.

Phone (587) 355-8527 Get a Free Estimate

Torque Recorded on Each Pile

Engineer-Stamped Plans on Request

Winter Installs, No Thaw Wait

Insured, With WCB Coverage

Screw Pile Foundation Work We Take On

Helical screw piles are the core of it, whether under a backyard deck, a new garage or an addition. The same crews handle underpinning repairs, commercial grade beams and oilfield equipment, and each job closes with paperwork an inspector can read.

Two rows of galvanized pile heads on a backyard lawn, roughly 2.5 metres between each, every head capped with a black saddle bracket.

Deck Foundations

Nothing to dig, nothing to cure — start framing that day.

A short galvanized pile head with a steel cap plate standing inside timber grade-beam formwork, rebar tied around it, on a detached-garage pad.

Garage Foundations & Grade Beams

Screw piles and grade beams engineered around Calgary clay.

Small machine installing a steel pile in the slim space between a fence and the wall of a house.

Home Additions & Sunrooms

Set close to the house while the old foundation stays untouched.

Lines of short steel pile heads capped with steel beams marking out a bungalow-sized footprint on an open rural acreage, ready for a ready-to-move home.

RTM, Modular & Mobile Home Foundations

Engineered screw pile foundations under RTM and modular homes.

A hydraulic drive head turning a steel pile down into the floor of a narrow pit dug beside a house foundation.

Foundation Underpinning

Halt the settlement and carry the house on engineered screw piles.

Hydraulic rams set on steel pile brackets, lined up to raise a concrete footing that has sunk.

Foundation Lifting & Levelling

Raise a sunken structure toward the elevation it started at.

A square steel anchor plate flush on a concrete block basement wall, held by a single nut on a short threaded rod end, with a stepped mortar crack behind it.

Basement Wall Anchors & Tiebacks

Hold a bowing basement wall where it is — and often draw it back.

Driveway slab dropped at a joint, a tidy line of small drilled injection ports along it and a hose connected to one of them.

Slab Jacking & Concrete Lifting

Bring sunken concrete back to level and keep the slab you have.

Lines of steel piles holding up the racking for a ground-mounted solar installation on open Alberta prairie.

Commercial Piling

Solar arrays, EV charger bases, sign footings and grade beams.

Galvanized steel piles in a line holding up an industrial pipe rack, insulated process pipes running along the top over a gravel pad.

Industrial & Oilfield Piling

Pipe racks, wellheads, compressor stations and remote sites.

A hydraulic jack with a pressure gauge seated on a steel plate on top of a galvanized pile head, the underside of a heavy steel test beam just above it.

Engineering & Pile Load Testing

Stamped drawings, load tests and torque checked against capacity.

Four Steps

What Hiring Us Looks Like

Nothing is hidden between the first phone call and the day the crew packs up. Below is the order things happen in, and what lands in your hands at each point.

Share What You Are Building

Phone or email with whatever you have: a garage footprint, the size of the deck, or a drawing set. Usually inside 48 hours, we come back with a sense of the scope and the factors that will shape the price.

Where We Install Screw Piles

Our crews work throughout Calgary and southern Alberta. Travel is never billed as an extra, and estimates typically come back within 48 hours wherever the site sits.